DSpace Home
→
Fakülteler
→
Teknoloji Fakültesi
→
Teknoloji Fakültesi Makale Koleksiyonu
→
Browsing Teknoloji Fakültesi Makale Koleksiyonu by Issue Date

Browsing Teknoloji Fakültesi Makale Koleksiyonu by Issue Date

Now showing items 1-20 of 107

The possibility of using fluid whey in comminuted meat products: capacity and viscosity of the model emulsions prepared using whey and muscle proteins

Zorba, O.; Yetim, H.; Özdemir, S.; Gökalp, Hüsnü Yusuf (Springer-Verlag, 1995)

The emulsion capacity (EC) of whey and sarcoplasmic proteins were low when they were used alone, but the EC and viscosity (EV) of total meat proteins (TMP) were higher than those values of other proteins investigated, ...
Effect of humidity on the tribological behavior of diamond-like carbon (DLC) film coated on WC-Co by physical vapor deposition method

Özmen, Yılmaz; Tanaka, A.; Sumiya, T. (Elsevier Sequoia SA, 2000)

DLC films have been coated by PVD on WC-Co substrate with and without Si interface. They have been tested under low (approximately 20%) and high (approximately 80%) humidity conditions by reciprocating friction and wear ...
Stress analysis of an orthotropic rotating disc under thermal loading

Çallıoǧlu, Hasan (2004)

In this study, a thermal stress analysis on a glass-fiber/epoxy orthotropic rotating hollow discs is investigated. A closed form solution is performed using polynomials under some considerations. The temperature distribution ...
Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading

Çallıoǧlu, Hasan; Topçu, Muzaffer; Altan, Gürkan (2005)

This study deals with the thermal stress analysis of a curvilinearly orthotropic rotating annular disc under internal and external pressures. The temperature distribution is chosen to vary parabolically from the inner ...
Fatigue properties of polypropylene involute rack gear reinforced with metallic springs

Mendi, F.; Can, Hilal; Külekci, M.K. (Elsevier Ltd, 2006)

In this present study fatigue properties of polypropylene gear reinforced with metallic springs was investigated. Three different springs was used as reinforcement material in the study. Involute rack gear specimens were ...
Neural network analysis of head-flow curves in deep well pumps

Gölcü, Mustafa. (2006)

In impellers with splitter blades, the difficulty in calculation of the flow area of the impeller is because of the unknown flow rate occurring in the two separate areas when the splitter blades are added. Experimental ...
Estimation of hourly mean ambient temperatures with artificial neural networks

Dombaycı, Ömer Altay.; Çivril, Önder. (2006)

In this study, the artificial neural networks have been used for the estimation of hourly ambient temperature in Denizli, Turkey. The model was trained and tested with four years (2002-2005) of hourly mean temperature ...
Elastic-plastic stress analysis of an orthotropic rotating disc

Çallıoğlu, Hasan; Topçu, Muzaffer; Tarakçılar, Ali Rıza (PERGAMON-ELSEVIER SCIENCE LTD, 2006)

In this study, the elastic-plastic stress analysis of a curvilinearly orthotropic rotating annular disc is investigated analytically for strain-hardening material behavior. To be able to see the separation of the plastic ...
The environmental impact of optimum insulation thickness for external walls of buildings

Dombaycı, Ömer Altan. (2007)

The city of Denizli is in the 3rd climatic region in Turkey and there is a heating requirement for a period of approximately five months. During this period, thermal insulation of buildings is very important in minimizing ...
Thermal stress analysis of curvilinearly orthotropic Rotating discs

Çallıoǧlu, Hasan. (2007)

This study deals with stress analysis on orthotropic rotating annular discs subjected to various temperature distributions, such as uniform, linearly increasing and decreasing with radius temperatures. Tangential and radial ...
Reducing the number of measurements in induction cooker design

Sazak, Bekir Sami.; Çetin, Sevilay. (2009)

Determination of impedance is essential to understanding and designing induction cooker. This paper discusses the predict the change in impedance by the variation of operation frequency and vessel diameter of an induction ...
An experimental investigation on the impact behaviour of glass/epoxy and hybrid composite plates

Sayer, Metin.; Bektaş, Numan Behlül.; Sayman, O.; Topçu, M. (2009)

In this study, the impact behaviours of glass/epoxy and hybrid (glass-carbon/epoxy) composite plates have been investigated experimentally. The increasing impact energy was performed on composite plates until complete ...
A research relating to innovation activities on enterprises using advanced manufacturing technologies

Okay, Şenol (2010)

This study is aimed at determining and evaluating the usage levels of advanced manufacturing technologies (AMTs) and their applications relating to innovation activities. In addition to this, determination of innovation ...
Impact behavior of hybrid composite plates

Sayer, Metin; Bektaş, Numan Behlül; Çallıoǧlu, Hasan (2010)

This experimental study deals with the impact response of hybrid composite laminates. Two different hybrid composite laminates, aramid/glass and aramid/carbon, and two different stacking sequences, such as [0/0/90/90] A+ ...
Computer aided and interactive greenhouse design application

Buyuktas, K.; Yılmaz, Şevket; Ertekin, C. (WFL Publisher Ltd., 2010)

The aim of this study was to calculate the dimensions of necessary measures and to determine the cost of a greenhouse structure, where vegetables are grown, by the computer based on some information provided by the user. ...
Exergy analysis of a solar-hydrogen hybrid energy system

Yılmaz Ulu, Eylem; Özturk, Harun Kemal (Praise Worthy Prize S.r.l, 2010)

In this study, exergy analysis of a photovoltaic-hydrogen production system established at the Clean Energy Center(CEC), in Denizli, Turkey has been investigated. Exergy analysis for photovoltaic systems is necessary for ...
The effects of ISO 9000 quality management system implementation in small and medium-sized textile enterprises: Turkish experience

Okay, Şenol; Semiz, S (ACADEMIC JOURNALS, 2010)

The aim of this study is to determine the effective factors, the difficulties encountered, and the attainable levels of the objectives in the certification process of small and medium-sized enterprises with the ISO 9000 ...
Vibration analysis of multiple delaminated composite beams

Çallıoǧlu, Hasan; Atlıhan, Gökmen; Topçu, Muzaffer (2012)

In this study, the effects of location, size and number of delaminations, boundary conditions, orientation angles and stacking sequences on the natural frequency of laminated composite beams are investigated experimentally, ...
A comparative study for the evaluation of two doses of ellagic acid on hepatic drug metabolizing and antioxidant enzymes in the rat

Çelik, Gurbet; Semiz, Aslı; Karakurt, Serdar; Arslan, Şevki; Adalı, Orhan; Şen, Alaattin (2013)

The present study was designed to evaluate different doses of ellagic acid (EA) in vivo in rats for its potential to modulate hepatic phases I, II, and antioxidant enzymes. EA (10 or 30 mg/kg/day, intragastrically) was ...
Phytochemistry and biological activities of terpene-rich essential oil (TREo) from Teucrium sandrasicum

Ali, Çelik; Ermiş, Ahmet; Herken, Emine Nur; Arslan, İdris (2013)

This study was aimed at evaluating the chemical constituents, antioxidant and antibiotic activity of the TREo (terpene-rich essential oil) of the endemic plant species Teucrium sandrasicum O.Schwarz. The TREo obtained by ...

Now showing items 1-20 of 107

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects
- By Type
- By Rights
- By Language
- By Category
- By Index
- By Tubitak Number
- By Ec

Browsing Teknoloji Fakültesi Makale Koleksiyonu by Issue Date

Browsing Teknoloji Fakültesi Makale Koleksiyonu by Issue Date

Search DSpace

Browse

All of DSpace

This Collection

My Account