• Turistlerin hediyelik eşya tercihleri ve tercihlerini etkileyen faktörler: Pamukkale örneği 

  Çetin, Ahmet; Özdipçiner, Nuray Selma; Ceylan, Seher; Argun, Fatoş Neslihan (2019-09)

  Turistik harcamalar içinde önemli bir yer tutan hatıra ve hediyelik eşya alışverişleri için bireysel olarak gerçekleştirilebilecek el üretimlerinden ileri teknoloji ürünlerine kadar pek çok üründen bahsetmek mümkündür. ...
• Sürdürülebilir tekstil üretiminde “Organik Pamuk” ve önemi 

  Kalkancı, Mihriban (Akademia Mühendislik ve Fen Bilimleri Dergisi, 2017)

  Türkiye’de; ihracat rakamları, istihdam değerleri ve üretim miktarları açısından tekstil ve hazır giyim sektörü, en önemli sektörlerinden birisidir ve ihracat gelirlerinin yaklaşık olarak %22’sıni karşılamaktadır. Tekstil ...
• Kuru relaksasyon i̇şlemi̇ni̇n, örme kumaş yapısal özelli̇kleri̇ne etki̇si̇ni̇n araştırılması 

  Kalkancı, Mi̇hri̇ban; Akaydın, Muhammet (Süleyman Demirel Üniversitesi, 2016)

  Bu çalışmada farklı iplik cinsleri ile üretilmiş süprem, lycralı süprem, interlok ve lycralı interlok kumaşlara uygulanan kuru relaksasyon işleminin, örme kumaşın yapısal özelliklerine etkisi incelenmiştir. Üretilen kumaşlar ...
• Hastane giysisi olarak kullanılan kumaşların antibakteriyel özellikleri üzerine bir araştırma 

  Akaydın, Muhammet; Kalkancı, Mihriban (SDU Journal of Science, 2014)

  Tekstil yüzeylerinin modern tıptaki kullanımları, kullanışlılık ve konfor açısından kendilerinden beklenilen bazı özellikleri sağlamalarını zorunlu kılmaktadır. Bunlar; kullanılan tekstil yüzeyinin kabul edilebilir yapısal ...
• Bornoz üretiminde bir operasyon i̇çin MTM metodu (Metot Zamanlarının Ölçümü) i̇le kronometre yönteminin karşılaştırılması 

  Kalkancı, Mihriban (Avrupa Bilim ve Teknoloji Dergisi, 2018-08)

  Tekstil ve hazır giyim sektöründeki rekabet koşulları, işletmeleri maliyetleri düşürmeye, fireleri azaltmaya, performans ölçümü yapmaya ve etkin bir planlama ile üretim sürecini çok iyi yönetmeye zorlamaktadır. İş ve zaman ...
• Prediction of dimensional change in finished fabric through artificial neural networks 

  Kalkancı, Mihriban; Si̇necen, M.; Kurumer, G. (Ege Universitesi, 2018)

  When anti-shrinkage precaution is taken for finishing processes, shrinkage could be observed with cotton and viscose fabrics by 8-15% and 20%, respectively. Therefore, capability of estimation of shrinkage rate for fabrics ...
• A field study on bio-ecology of deronectes toledoi (Coleoptera: Dytiscidae) in the Eastern Anatolia Region of Turkey 

  Erman, Ö.K.; Özen, A.; Akyıldız, Gürçay Kıvanç (Gazi Entomological Research Society, 2018)

  Deronectes toledoi Fery, Erman and Hosseinie, 2001 (Dytiscidae) is an endemic aquatic beetle only known from Turkey (Erzurum, Toprakkale). Relatively little has been learned about this beetle since it was discovered. We ...
• Development and characterization of naproxen-loaded poly(vinyl alcohol) nanofibers crosslinked with polycarboxylic acids 

  Akduman, Çiğdem; Kumbasar, E.P.A.; Özgüney, I. (American Association of Textile Chemists and Colorists, 2018)

  Poly(vinyl alcohol) (PVA) hydrogel nanofibers are a potential candidate for textile-based drug-release applications. Polycarboxylic acids 1,2,3,4-butanetetracarboxylic acid (BTCA) and citric acid (CA) are low-cost alternatives ...
• Zercon ostovani sp. Nov. (Acari: Mesostigmata: Zerconidae) from Iran 

  Javan, S.; Karaca, Mehmet; Urhan, R. (Turkiye Klinikleri Journal of Medical Sciences, 2018)

  Zercon ostovani sp. nov. is described and illustrated based on female specimens collected from Eram Botanical Garden in Fars Province, southwestern Iran. The similarities and differences between related species within the ...
• The comparative study of nursing pads by electrospun cellulose acetate, polyethylene oxide and thermoplastic polyurethane nanofibers 

  Akduman, Çiğdem; Kumbasar, E.P.A.; Ozguney, I. (Institute of Physics Publishing, 2018)

  This study summarizes the general information about nursing pads and novel electrospun nanofiber mats as potential component for nursing pads. It also compares electrospun thermoplastic polyurethane (TPU), cellulose acetate ...
• Transportation and kinetic analysis of Zn(II) ions via MDLM system containing D2EHPA as carrier 

  Erden, Kadriye Esen; Donat, R. (Techno Press, 2018)

  In this study, a new method called as multi-dropped liquid membrane (MDLM) which is more practical and more effective than other liquid membrane techniques is applied for transport of Zn(II) has been studied. HCl as the ...
• Different approaches in bathrobe manufacturing: New concept Pestemal bathrobes, an irreplaceable element of Hammam culture 

  Kalkancı, Mihriban (Institute of Biopolymers and Chemical Fibres, 2018)

  In the present study, bathrobes manufactured from terry towel fabric in the scope of home textile and new trend bathrobes made from pestemal with a 650-year long history were compared in terms of their fabric utilization ...
• Developing a software calculating fabric consumption of various bathrobe models 

  Kalkancı, Mihriban; Özer, I. (Inst. Nat. Cercetare-Dezvoltare Text. Pielarie, 2018)

  Considering the customer requests and speed in the textile sector, very fast and accurate pricing should be done when the customers ask for very urgent prices for different styles. Customers often ask for sample pricing ...
• Synthesis and characterization of 3-acetoxy-2-methyl-N-(phenyl)benzamide and 3-acetoxy-2-methyl-N-(4- methylphenyl)benzamide 

  Kırca, B.K.; Çakmak, Ş.; Kütük, H.; Odabaşoğlu, Mustafa; Büyükgüngör, O. (Elsevier B.V., 2018)

  This study treats about two successfully synthesized secondary amide compounds 3-Acetoxy-2-methyl-N-(phenyl)benzamide, I and 3-Acetoxy-2-methyl-N-(4-methylphenyl)benzamide, II. Compounds were characterized by FTIR, 1H NMR, ...
• A multicenter experience of thrombotic microangiopathies in Turkey: The Turkish Hematology Research and Education Group (ThREG)-TMA01 study 

  Tekgündüz, E.; Yılmaz, M.; Erkurt, M.A.; Kiki, I.; Kaya, A.H.; Kaynar, L.; Alacacioglu, I.; Cetin, G.; Ozarslan, I.; Kuku, I.; Sincan, G.; Salim, O.; Namdaroglu, S.; Karakus, A.; Karakus, V.; Altuntas, F.; Sarı, İsmail; Ozet, G.; Aydogdu, I.; Okan, V.; Kaya, E.; Yildirim, R.; Yildizhan, E.; Ozgur, G.; Ozcebe, O.I.; Payzin, B.; Akpinar, S.; Demirkan, F. (Elsevier Ltd, 2018)

  Thrombotic microangiopathies (TMAs) are rare, but life-threatening disorders characterized by microangiopathic hemolytic anemia and thrombocytopenia (MAHAT) associated with multiorgan dysfunction as a result of microvascular ...
• Modification of Leather Surface with Atmospheric Pressure Plasma and Nanofinishing 

  Kaygusuz, Meruyert; Meyer, M.; Junghans, F.; Aslan, A. (Taylor and Francis Inc., 2018)

  In this study, the effect of plasma treatment and nanofinishing on leather properties was investigated. O2and N2gases were used for activating the leather surface, and thin layers were deposited by hexamethyldisiloxane and ...
• An efficient sliding mode observer-based model predictive control: experimental implementation on a DC/DC power converter 

  Bahtiyar, Bedri; Çetin, M.; Beyhan, S.; İplikçi, S. (SAGE Publications Ltd, 2018)

  In this paper, a discretization-based sliding mode observer (DBSMO) is proposed for the state and parameter estimation of nonlinear systems. In the DBSMO structure, an accurate discretized dynamics are derived for the state ...
• Importance of CdS buffer layer thickness on Cu2ZnSnS4-based solar cell efficiency 

  Cantaş, Ayten; Turkoglu, F.; Meric, E.; Akca, F.G.; Ozdemir, M.; Tarhan, E.; Ozyuzer, L.; Aygun, G. (Institute of Physics Publishing, 2018)

  Cu2ZnSnS4 (CZTS) thin films were grown on Mo-coated soda lime glass (SLG) substrates by the sulfurization of DC magnetron-sputtered Zn, Sn and Cu metallic precursors under a sulfur atmosphere at 550 °C for 45 min. Understanding ...
• Equal channel angular extrusion for tube configuration of Al-Zn-Mg-Cu alloy 

  Ebrahimi, M.; Shaeri, M.H.; Naseri, R.; Göde, Ceren (Elsevier Ltd, 2018)

  Microstructural evolution to ultrafine grains and consequently, enhancement of mechanical properties has been recently considered for tube formed specimens using various severe plastic deformation methods. In this research, ...
• Comparision of in situ spectroscopic ellipsometer and ex situ x-ray photoelectron spectroscopy depth profiling analysis of HfO 2 /Hf/Si multilayer structure 

  Cantaş, Ayten; Ozyuzer, L.; Aygun, G. (Institute of Physics Publishing, 2018)

  A HfO 2 film was grown by RF magnetron sputtering technique on a Si substrate Using in situ Spectroscopic Ellipsometry (SE), the film thickness and refractive index were examined as a function of deposition time. Ex situ ...

View more